DFI ITOX Mitsubishi CM33-TL CM33-TL/G CM33T3-100G Industrial Motherboard tested

SAFE Shipping from EU country, with tracking number, and signed delivery. 

DFI ITOX CM33-TL CM33T3-100R.CA0 Motherboard Industrial 

Mitsubishi Electric Automation CM33-TL Series CPU Board 

OEM Part -FULLY TESTED

---

Price comparison:

• On_ebay seller -> NEW -> gelogistics = 495Eur + Shipping 161-260Eur
• On_ebay seller -> Refurbished -> techmechinc = 475Eur + Shipping 60Eur

---

ITOX CM33-TL Series CPU Board 

DFI CM33-TL Series CPU Board 

Processor: 

• Pentium III 

- FCPGA2 133MHz FSB (1.13GHz-1.26GHz on 0.13µ)

 - FCPGA 133MHz FSB (533EB-1GHz) 

- FCPGA 100MHz FSB (500E-1.1GHz) 

 

• Celeron 

- FCPGA2 100MHz FSB (≥1.2GHz on 0.13µ)

- FCPGA 100MHz FSB (800MHz-1.1GHz)

- FCPGA 66MHz FSB (566MHz-700MHz)  

 

Chipset:  

• VIA CyrixIII processor 

• VIA Apollo PLE133T 8601T/82C686B 

 

System Memory: 

• Up to 1GB using VCM (Virtual Channel Memory) or PC SDRAM DIMM (unbuffered or registered) 

• Two 168-pin DIMM sockets 

• Uses x64 PC SDRAM, 3.3V - PC-66 SDRAM DIMM for 66MHz FSB processors 

- PC-100 SDRAM DIMM for 100MHz FSB processors 

- PC-133 SDRAM DIMM for 133MHz FSB processors 

 

BIOS: 

• Award BIOS, Windows 95/98/2000/ME Plug and Play compatible 

• Supports SCSI sequential boot-up 

• Flash EPROM for easy BIOS upgrades 

• Supports DMI 2.0 function 

• 2Mbit flash memory 

 

Onboard Graphics Features: 

• Integrated rCADE3D 2D/3D/Video accelerator 

- Shares 8MB of the system memory 

- Optimized Shared Memory Architecture (SMA) 

- High quality DVD video playback 

• 3D rendering features 

- 32-bit true color rendering 

- MPEG-2 video textures 

• 2D hardware acceleration features 

• Motion video architecture 

• Software drivers 

- Windows 98/98SE/ME/2000 

- Windows NT 4.0 

 

Onboard LAN Features: 

• Uses Realtek RTL8100 fast ethernet controller 

• Integrated IEEE 802.3 10BASE-T and 100BASE-TX compatible PHY 

• 32-bit PCI master interface 

• Integrated power management functions 

• Full duplex support at both 10 and 100 Mbps 

• Supports IEEE 802.3u auto-negotiation 

• Supports wire for management 

 

PCI IDE Interface: 

• Supports ATA/33, ATA/66 and ATA/100 hard drives 

• PIO Mode 3 and Mode 4 Enhanced IDE (data transfer rate up to 16.6MB/sec.) 

• Bus mastering reduces CPU utilization during disk transfer 

• ATAPI CD-ROM, LS-120 and ZIP supported   

 

Processor Socket: 

• Socket 370 

• Equipped with a switching voltage regulator that automatically detects 1.050V to 1.825V 

 

ATX Double Deck Ports: 

• 2 USB ports 

• 1 RJ45 LAN port 

• 1 DB-9 serial port 

• 1 DB-15 VGA port 

• 1 DB-25 parallel port 

• 1 mini-DIN-6 PS/2 keyboard port 

• 1 mini-DIN-6 PS/2 mouse port 

• 1 game/MIDI port 

• 3 audio jacks: line-out, line-in and mic-in 

 

Connectors: 

• 1 connector for 2 additional external USB ports 

• 1 connector for 1 external serial port 

• 1 connector for IrDA interface 

• 2 IDE connectors 

• 1 floppy connector 

• 1 ATX power supply connector 

• 1 Wake-On-LAN connector 

• 1 Wake-On-Ring connector 

• 2 fan connectors for CPU and chassis fans 2 internal audio connectors (AUX-in and CD-in) 

• 1 connector for external line-out and mic-in jacks 

 

Expansion Slots: 

• 2 dedicated PCI slots 

• 1 shared PCI/CNR slot 

• 4 layers, microATX form factor 

• 24.4cm (9.6") x 19cm (7.48")

 

PCB: 

• 4 layers, microATX form factor 

• 24.4cm (9.6") x 19cm (7.48")