Cheaper Than eBay
Cheaper Than eBay
Cheaper Than eBay
Cheaper Than eBay
Cheaper Than eBay
Cheaper Than eBay
Cheaper Than eBay
Cheaper Than eBay
Cheaper Than eBay
Cheaper Than eBay
Cheaper Than eBay
Mentor Embedded Performance MAJIC MX JTAG Interface box EPI JEENI JTAG Ethernet
- Condition : Used
- Dispatch : 3 Days
- Brand : None
- ID# : 205900757
- Quantity : 1 item
- Views : 108
- Location : United States
- Seller : bizsurplus (+90)
- Barcode : None
- Start : Mon 06 Dec 2021 01:07:38 (EDT)
- Close : Run Until Sold
- Remain : Run Until Sold
![The Rock(1998)[VideoCD] Rare (Not DVD)](https://pic.ebid.net/upload_medium/0/6/5/uo_1670449566-4024-43.jpg)
![Enemy At the Gates(2001)[VideoCd]](https://pic.ebid.net/upload_medium/8/5/4/uo_1670449779-4076-10.jpg)
Seller's Description
|
Mentor Embedded Performance MAJIC MX JTAG Interface box EPI JEENI JTAG Ethernet
We gladly ship worldwide*!
| |
|
Embedded Performance MAJIC MX JTAG Interface Controller with Manual
MAJICMX
Multi
-Tap
-Processor
-Session Debug
-Context/Thread
-Architecture
On-Chip Trace
MAJIC-MX Multi-processor Advanced JTAG Interface Controller with MDSS
MAJIC-MX MDSS Development System Features:
Product Information
Finally a non-intrusive debug solution for your multiple core SoC and high CPU pipeline speed designs. Now, you can have the same level of control and visibility of the embedded CPU as you would with in-circuit emulators in traditional discrete CPU designs. The result is faster software integration, better testing, and improved time to market.
The MAJIC-MX probe is the latest model in the MAJIC Series of intelligent debug probes. The series now supports scaling of SoC devices to unlimited clock rates and to unlimited number of on-chip cores. MAJIC-MX probe embodies the new EPI MDSS debug concept. This concept allows fast integration and debugging of software for complex SoC devices. It recognizes that SoC designs are rapidly scaling up in both pipeline speeds and complexity. Thus, MDSS supports:
The MAJIC-MX probe provides a high-speed hardware interface between processors with an on-chip debug interface and industry standard debuggers. It is available with a choice of EPI debuggers and may be used with used with task-aware debuggers from leading OS vendors. The unit is self-contained in a small case approximately 2 x 6.5 x 7.5 inches in size.
The non-intrusive MAJIC-MX probe communicates with the CPU core by JTAG interface using the existing boundary scan pins. For most on-chip debug facilities, it uses no target memory and requires no porting to the target system.
Complete processor control means you can start, stop and single-step execution; read and write to registers, memory, and system I/O; and download code to target RAM - all within most industry standard debugger interfaces.
Built-in memory tests assist in hardware testing. And the EPI open-source flash programming algorithm allows programming of flash memory located either internal or external to the SoC device.
The MAJIC-MX probe expands to support additional cores, debug interfaces, or SoC devices. This eliminates the need to buy new emulators for each new project, thus reducing project costs.
You may adapt the MAJIC-MX controller for operation with your specific processor or CPU cores by selecting from a wide range of configuration kits. The kits contain the firmware and user license to match your CPU's on-chip debug facilities. Install multiple configuration kits, and the MAJIC-MX probe will support a variety of CPU types.
The MAJIC-MX controller is ready to run with the EPI software tools and any development board that supports a connection to the on-chip debug interface. This combination of tools will work together to provide you with a proven working environment.
The MAJIC-MX controller is available as a stand-alone unit or as a complete debugging kit. The kit contains serial and Ethernet cables, source-level debugger, and one year of free maintenance, support, and updates. Part number: MAJIC-MX-KIT.
Complete development kits are also available that include a compilation toolkit. See the EPI Price and Configuration Guide for full details of these development kits.
Features of the MAJIC-MX probe include:
Multi-Dimensional Scaling Support for SoC Devices
MAJIC-MX probe embodies the new MDSS debug concept. This concept allows fast integration and debugging of software for complex SoC devices. To support SoC designs that are rapidly scaling up in both pipeline speeds and complexity, MAJIC-MX probe supports:
Execution Tracing
MAJIC-MX controller supports full execution tracing from CPU cores that offer on-chip trace buggers. Trace control allows tracing from start of execution or tracing up to a breakpoint.
Ethernet Interface
The 10/100 Ethernet interface provides many advantages over serial or parallel interfaces to the host. Download of your application code is over ten times faster than with serial interface. This will significantly reduce the amount of time spent waiting for code changes to download to your target board.
Network connection allows remote operation of the MAJIC-MX probe. Now you can access the lab setup directly from your desktop. This allows multiple engineers to share a common test bench.
Flash Memory
The firmware of a MAJIC-MX probe is easily upgraded without the need to replace ROMs.
Quickly install new configuration kits to add support for multiple CPU types and easily program IP address into the unit for point-to-point Ethernet operation.
Internal RISC Processor
A high-performance internal RISC processor provides fast response to debugger operations, such as single-stepping and downloading code to the target.
Programmable JTAG Clock
The MAJIC-MX probe features a programmable TCK with a 0 to 40 MHz range. This allows you to tailor the JTAG operation to match the performance of your target. It also means that you can use the MAJIC-MX probe with low-speed ASIC emulators, with FPGA implementation of your SoC design, or with devices that feature sleep-mode operation.
Convenient Reset Switch
A convenient reset button on the MAJIC-MX probe is protected against accidental activation, yet is easily accessible by the user when a complete system reset is desired.
Programmable Trigger Control
The MAJIC-MX probe gives you control over both the trigger-in and trigger-out signals. The trigger-in signal may be used to create a breakpoint or synchronize execution. A trigger output may set to indicate execution status, indicate memory accesses, or indicate a memory test failure.
Status LEDs
The MAJIC-MX probe provides five LEDs, which show the operational status of the controller. These LEDs also indicate the results of the built-in self-test that is automatically performed upon startup.
International Power Supply
The MAJIC-MX probe operates from a standard 5V power source. It comes with an external UL/CE-approved AC adapter, whose AC input range is compatible with all international AC voltage and frequency ranges. A standard three-wire power connector is compatible with readily available power cords through the world.
Specifications:
MAJIC-MX probe
Item is in good physical condition and came from a working business that closed. Item powers up.
Auction Includes power adapter Jtag cable, users/programmers manual.
Don't forget to place your bid.
|
           |
|
By bidding on this auction you agree to the following terms:
Shipping Terms:
Payment Terms:
International Terms: (These terms only apply to international shipments.)
Warranty Terms:
Return Terms:
Shipping Damage Terms:
Medical Equipment Terms:
The sale of these items may be subject to regulations by the U.S. FDA and state and local regulatory agencies. If so, you may not be able to bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller: Daniel Rydell San Diego, CA contact via messages.
If any provision of this Auction Contract is held unenforceable, All remaining provisions of this Contract shall remain in full force and effect.
Copyright 2017 BigonBusiness - All Rights Reserved.
| |
Listing Information
| Listing Type | Gallery Listing |
| Listing ID# | 205900757 |
| Start Time | Mon 06 Dec 2021 01:07:38 (EDT) |
| Close Time | Run Until Sold |
| Starting Bid | Fixed Price (no bidding) |
| Item Condition | Used |
| Bids | 0 |
| Views | 108 |
| Dispatch Time | 3 Days |
| Quantity | 1 |
| Location | United States |
| Auto Extend | No |
Seller Recent Feedback
Returns Policy
Returns Accepted
Refund Type: Money Back
Shipping Cost Paid by: Buyer
Returns Within: 30 Days
