Teardrop Trailer Plans DIY Lightweight Camper For Motorcycle Small Car Build

✔️ Teardrop Trailer Plans

✔️ DIY Lightweight Camper For Motorcycle Small

✔️ The objective of the Little Lite design is to produce a small, light teardrop trailer suitable for the smallest tow vehicle including large motorcycles

✔️ To get the minimum weight, the trailer is built no stronger than it need to be to do its job and uses only single-skin construction throughout.

✔️ The trailer will serve its intended purpose well but is not suitable for other uses - if you want to also use your trailer to, say, collect scrap batteries for recycling, pick another design.

Teardrop Trailer Plans DIY Lightweight Camper For Motorcycle Small Car Build THE LITTLE LITE The objective of the Little Lite design is to produce a small, light teardrop trailer suitable for the smallest tow vehicle including large motorcycles. This note describes and illustrates the design - working drawings follow after the text. To get the minimum weight, the trailer is built no stronger than it need to be to do its job and uses only single-skin construction throughout. The trailer will serve its intended purpose well, but is not suitable for other uses - if you want to also use your trailer to, say, collect scrap batteries for recycling, pick another design. To get the minimum size, the trailer has been designed to be low, no more than is needed to enable the occupants to sit up with their heads nearly touching the roof and to be not much longer than the bed length. To fit in two people in bearable comfort, the width has been kept at the traditional teardrop four feet - if the trailer is intended only for solo use, the body width could be reduced. There is no galley and no hatch at the back, to save both weight and size. If a full galley is wanted, it can be built it into a traditional camp kitchen box.

I will send you a PDF to the e-mail provided by PayPal. If you would like hard copies on 8 1/2 X 11 paper, please let me know at the time of purchase.   

All DIY plans are designed or reviewed by Ben Stone. Ben is a retired Engineer in Canada. Ben also drafts these himself using the latest AutoCAD software to ensure accuracy. He studied Engineering back in the early 1980s. After over 30 years in the Construction industry, he developed a passion for building cool items around his farm and cabin. These are great DIY projects. With a little skill, anybody can Do It Yourself. Ben is always an email away if you have any questions while building one of his projects. He is adding new plans all the time.